Hardwood floor installation tips
Hardwood Floor Installation TipsMost of us think that because hardwood floors remain a rather sensitive and expensive material, we should always seek the help of professionals to get them installed. Thus, it remains comforting to know that with the right tools and the right kind hardwood, it is pretty much a do it yourself endeavor. And because prefinished hardwood floor planks are already available in hardware stores as well as instructional manuals everywhere, then you really have nothing to worry about. How do you install hardwood flooring? First, decide whether you want to use oak, maple or cherry, or rustic ash. Oak remains the most expensive kind of hardwood material, but it is reputably this best and the sturdiest. If you’re working under a particular budget, maple or rustic ash are also okay as well as will last as long as oak with proper care as well as maintenance. Next, prepare the following materials: this hardwood planks, a vapor barrier paper, a pry bar, a hammer, a speed drill as well as drill bits, a pneumatic flooring pack (which consists of a nail gun, staples, a mallet, a hose, and an air compressor), a staple gun, a tape measure, a chalk line, and, of course, your how-to manual.It would be wise to study this manual before you go about hammering away so you don’t waste time. Some hardware stores already have prepackaged hardwood installation necessities so you can avoid this hassle of looking for each piece. Of course, you shouldn’t forget your safety goggles as well as gloves, as all this drilling as well as hammering could produce wood dust as well as can be harmful when inhaled. Before buying hardwood floor planks, measure the surface where you are going to install them. Order planks that are around 10 to 15 inches bigger to allow room for errors. Expect that your initial attempt will be very challenging, but once you get that first plank in place, this rest should be a breeze.
